Opening Garage Door (Up Limits) - Genie SC 1500, TriloG 1200 Operation & Maintenance Manual

3
Required Programming
5
Press and release the Program Set button (both
LEDs flash blue and go off).
PROGRAM
–
SET
The DOWN (closed) limit is programmed.

Opening Garage Door (Up Limits)

NOTE: Beginning with garage door closed is recommended but not
necessary.
6
Press and hold the up arrow button (+) for
2 seconds until the long LED light comes on blue
(round LED remains off).
PROGRAM
–
SET
7
Release up arrow button (+) and the round LED
will begin flashing.
PROGRAM
SET
PROGRAM
+
SET
PROGRAM
+
SET
HOLD HOLD
2 seconds 2 seconds
–
+
8
Press and hold the up arrow button (+) until door is
fully open, then release.
PROGRAM
SET
PROGRAM
SET
9
Press and release the Program Set button (both
LEDs flash blue and go off).
PROGRAM
–
SET
The UP (open) limit is programmed.
BOTH DOOR LIMITS ARE NOW PROGRAMMED.
+
–
HOLD
– +
PROGRAM
+
SET
7