Opening Garage Door (Up Limits) - Genie PowerMax 1200 Operation & Maintenance Manual

3
Required Programming
5
Press and release the Program Set button (both
LEDs flash blue and go off).
PROGRAM
The DOWN (closed) limit is programmed.

Opening Garage Door (Up Limits)

NOTE: Beginning with garage door closed is recommended but not
necessary.
6
Press and hold the up arrow button (+) for
2 seconds until the long LED light comes on blue
(round LED remains off).
PROGRAM
SET
7
Release up arrow button (+) and the round LED
will begin flashing.
PROGRAM
SET
G999-393 Manual-ScrewBeltChain-EN indd 7
PROGRAM
– +
PROGRAM
–
HOLD HOLD
2 seconds 2 seconds
–
8
Press and hold the up arrow button (+) until door
is fully open, then release. Watch carriage as
it approaches the power head to avoid contact
with powerhead.
SET
SET
9
Press and release the Program Set button (both
LEDs flash blue and go off).
PROGRAM
The UP (open) limit is programmed.
BOTH DOOR LIMITS ARE NOW PROGRAMMED.
PROGRAM
–
SET
HOLD
PROGRAM
–
SET
– +
PROGRAM
ET
7
7/13/12 10 17 AM