Safety Information; Safety Notifications; Important Safety Instructions - Genie SC 1500, TriloG 1200 Operation & Maintenance Manual

Screw/belt/chain drives
Hide thumbs Also See for SC 1500, TriloG 1200:
Table of Contents

Advertisement

1

Safety Information

OVERVIEW OF POTENTIAL HAZARDS
READ THIS SAFETY INFORMATION
CONVENTIONS USED IN THESE INSTRUCTIONS
Garage doors are large, heavy objects that move with the help of
springs under high tension and electric motors. Since moving objects,
springs under tension, and electric motors can cause injuries, your
safety and the safety of others depend on you reading the information
in this manual. If you have questions or do not understand the infor-
mation presented, call your nearest trained door system technician or
visit our website at www.geniecompany.com
The following safety alert symbol and signal words are used
throughout this manual to call attention to and identify different levels
of hazard and special instructions.
This is the safety alert symbol. This symbol alerts you to
potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and the word
"DANGER", "WARNING", or "CAUTION".
indicates an imminently hazardous situation which, if
NOT avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if
NOT avoided, could result in death or serious injury.
indicates a potentially hazardous situation which, if
NOT avoided, may result in injury or property damage.
NOTE is used to indicate important steps to be followed or
important considerations.
Potential
Hazard
TO REDUCE THE RISK OF SEVERE INJURY OR DEATH
READ AND FOLLOW ALL SAFETY, INSTALLATION AND OPERATION INSTRUCTIONS. If you have
any questions or do not understand an instruction, call The Genie® Company or your local
Genie® Factory Authorized Dealer.
install operator on an improperly balanced door. An improperly balanced door
could cause severe injury. Repairs and adjustments to cables, spring assembly, and other
hardware must be made by a trained service person using proper tools and instructions.
connect the operator to the source of power until instructed to do so.
Locate the wall console button: A) Within sight of door. B) At a minimum height of 5 feet
so small children cannot reach it. C) Away from all moving parts of the door.
Install the entrapment WARNING label next to the wall button or console. Install the
emergency release tag on, or next to, the emergency release handle.

Important Safety Instructions

Effect
WARNING
Could result
in Death
or Serious
Injury
WARNING
Could result
in Death
or Serious
Injury
WARNING
Could result
in Death
or Serious
Injury
WA R N I N G
Prevention
Keep people clear of opening
while door is moving.
DO NOT allow children to play
with the door opener.
DO NOT operate a door that
jams or one that has a
broken spring.
Turn OFF power before
removing opener cover.
When replacing cover, make
sure wires are NOT pinched or
near moving parts.
Opener must be fully
grounded.
DO NOT try to remove, install,
repair or adjust springs or
anything to which door spring
parts are fastened, such as,
wood blocks, steel brackets,
cables or other like items.
Installations, repairs and
adjustments must be done
by a trained door system
technician, using proper tools
and instructions.
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents