Option Menu Setting - Alpine CDE-133EBT Owner's Manual

Option Menu Setting

You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
Note
• e option menu varies depending on the source.
2
Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
3
Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
 Setting item:
TUNER mode:
*1
VOL LV ADJ
DISC mode:
*2 *1
CD SET  VOL LV ADJ
USB mode:
*1
VOL LV ADJ
iPod mode:
*3 *4
iPod CONT  iPod SET
AUX mode:
*5
AUX SET  VOL LV ADJ
BT AUDIO mode:
*6 *1
BT SET  VOL LV ADJ
Phone mode (Non-calling mode):
*7
PHONE SET  VOL LV ADJ
Phone mode (Calling mode):
*9
SPK SWITCH  VOICE MUTE
*12
CALL SOUND  END CALL
*1 You can individually emphasise or weaken the volume level of
the current source to create your own tonal preference.
setting values in Option mode and in SETUP mode are linkage.
Refer to "Setting the Source Volume Level" on page 13.
*2 PLAY MODE can be selected in this mode. For details, refer to
"Playing MP3/WMA Data (PLAY MODE)" on page 16.
*3 Refer to "Setting the iPod Control" on page 25.
e setting items are the same as iPod setting in SETUP mode.
*4
For details, refer to "iPod/iPhone Setting" on page 17.
*5 AUX NAME can be selected in this mode. For details, refer to
"Setting the AUX SETUP Mode" on page 16.
*6 FW VERSION can be selected in this mode. You can see the
current rmware version about BLUETOOTH by using this
setting.
*7 CALL SOUND, SENDER ID, PB UPDATE, PB ORDER, AUTO
ANS, SEV NAME, SPEAKER SL and FW VERSION can be
selected in this mode. For details about these settings, refer to
"BLUETOOTH SETUP" on page 18.
e Hands free phone talk level, ring tone level and microphone
*8
gain level can be adjusted by using this setting.
values in Option mode and in SETUP mode are linkage. Refer to
"Setting the Source Volume Level" on page 13.
*9 While calling, the call sound can be switched between the unit
and mobile phone by using this setting.
is operation can also be done by pressing BAND. Refer to
"Call Switching Operation" on page 23.
*1
 VOL LV ADJ
*1
*8
*10 *11
 CALL WAIT 
*13 *8
 VOL LV ADJ
e setting
*10 While calling, and the Voice Mute is activated, the microphone
input will mute instantly and "VOICE MUTE" will blink.
operation can also be done by pressing . Refer to "Muting
the microphone input quickly (Voice Mute)" on page 23.
*11 If there is a waiting call, select this item to display the caller's
Name and waiting number (1 or 2). Press VIEW and the display
will switch.
*12 Refer to "Setting the BLUETOOTH sound quality" on page 19.
*13 Select this item to hang up the call.
e
is
15
-EN