Option Menu Setting; Setup; Setting - Alpine CDE-152 Owner's Manual

Option Menu Setting

You can quickly adjust the setting items relevant to the current SOURCE
by using Option Menu.
1
Press and hold ENTER/OPTION for at least 2 seconds
to activate the Option menu of the current source.
Note
• The option menu varies depending on the source.
2
Turn the Rotary encoder to select the desired setting
item, and then press ENTER.
3
Turn the Rotary encoder to change the setting, and then
press ENTER.
After the setting, the display will return to the current source
automatically.
 Setting item:
TUNER mode:
*1
 SOURCE VOL
TUNER SET
DISC mode:
*3
 SOURCE VOL
CD SET
USB mode:
*2
SOURCE VOL
iPod mode (CDE-152/CDE-151 only):
*4
 iPod SET
APP DIRECT
AUX mode:
*6
 SOURCE VOL
AUX SET
*1 The setting items are the same as TUNER setting in SETUP
mode. For details, refer to "SETUP" on page 18.
*2 You can individually emphasise or weaken the volume level
of the current source to create your own tonal preference. The
setting values in Option mode and in SETUP mode are
linked. Refer to "Setting the Source Volume Level" on page 14.
*3 PLAY MODE can be selected in this mode. For details, refer
to "Playing MP3/WMA Data (PLAY MODE)" on page 19.
*4 Refer to "Setting the iPod Control" on page 21.
*5 These settings are the same as those accessed through the
SETUP mode. For details, refer to "iPod/iPhone Setting" on
page 20.
*6 AUX NAME can be selected in this mode. For details, refer to
"Setting the AUX NAME mode" on page 19.
Notes
• Press r to return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
18
-EN
*2
*2
*5 *2
 SOURCE VOL
*2

SETUP

AUDIO/SETUP
SOURCE/ 
Rotary encoder

/ENTER

Setting

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
1
Press and hold AUDIOSETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
(e.g. Select GENERAL)
*1
 GENERAL  DISPLAY  TUNER  iPod
AUDIO
GENERAL:
*3
 AUX SETUP
CLOCK ADJ
 DEMO MODE
DISPLAY:
DIMMER  TEXTSCROLL
TUNER:
TUNER FREQ
iPod:
iPod LIST
*1 Refer to "Audio Setup" on page 13.
*2 CDE-152/CDE-151 only.
*3 Refer to "Setting Time" on page 9.
*4 Not displayed when the current source is AUXILIARY.
*5 Displayed only when AUX SETUP is set to ON.
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select AUX ON or AUX OFF)
5
Press and hold AUDIOSETUP for at least 2 seconds to
return to normal mode.
Notes
• Press r to return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
mode.
*2
*4 *5
 AUX NAME  PLAY MODE