Operational Checks; Ice Thickness Check; Ice Thickness Adjustment - Manitowoc Neo Technician's Handbook

Operational Checks

ICE THICKNESS CHECK

After a harvest cycle, inspect the ice cubes in the ice
storage bin. The ice bridge connects the ice cubes and
must be set to maintain an ice bridge thickness of 1/8"
(3.2 mm). To adjust the thickness of the bridge refer to

ice thickness adjustment.

ICE THICKNESS ADJUSTMENT
The ice thickness can be adjusted to three levels.
1. Pull forward on the bottom of the bracket until
clear of the tab.
2. Slide the bracket over the desired tab and
release.
• The center position is the normal factory setting.
• To increase bridge thickness, raise the water level.
• To decrease bridge thickness, lower the water
level.
Thicker
Bridge
56
Factory
Default
Setting
Part Number STH042 3/14
Thinner
Bridge