Water Service/Drains
WATER SUPPLY
Local water conditions may require treatment of the
water to inhibit scale formation, filter sediment, and
remove chlorine odor and taste.
If you are installing a Manitowoc water filter
system, refer to the Installation Instructions
supplied with the filter system for ice making
water inlet connections.
For ice making, connect to a potable water supply
only.
WATER INLET LINES
Follow these guidelines to install water inlet lines:
•
Do not connect the ice machine to a hot water
supply. Be sure all hot water restrictors installed for
other equipment are working. (Check valves on
sink faucets, dishwashers, etc.)
•
If water pressure exceeds the maximum
recommended pressure, 80 psig (5.5 bar) obtain a
water pressure regulator from your Manitowoc
distributor.
•
Install a water shut-off valve for ice making potable
water.
•
Insulate water inlet lines to prevent condensation.
Part Number STH042 3/14
Important
!
Warning
27