Advertisement
IMPORTANT INFORMATION
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna or cable system is to be connected to the TV, make sure that the
antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70,
provides information with regard to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors,
location of antenna discharge unit, connection to grounding electrodes, and requirements of
the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused
for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or
cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such
power lines or circuits.
- 4 -
Advertisement
Need help?
Do you have a question about the PLCD3956A and is the answer not in the manual?
Questions and answers
there are some buttons in the directions but not corresponding with remote
The ProScan PLCD3956A TV follows NEC’s universal remote code, meaning a universal remote may require specific codes to function correctly. If some buttons do not match, it could be due to differences in remote programming, incorrect codes, or an incompatible universal remote.
This answer is automatically generated
won't turn on with remote or power button
The ProScan PLCD3956A may not turn on with the remote or power button due to several reasons:
1. Remote Issues:
- The batteries may be dead or not properly installed. Remove and reinstall the batteries after holding the power button for about 2 seconds.
- Ensure there is a clear line of sight between the remote sensor on the TV and the remote control.
2. Power Indicator:
- Check the indicator light. If it's red, the TV is plugged in but not on. If it's green, the TV is on.
3. Power Source:
- The TV must be connected to the correct power source. Using the wrong power source may cause failure to turn on.
- Make sure the power cord is securely connected and not damaged.
4. Safety Shutoff:
- If the TV was unplugged due to a lightning storm or for a long period, reconnect it and try powering it on again.
If none of these steps resolve the issue, the TV may require service.
This answer is automatically generated