Advertisement
SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal
injuries and property damage if improperly handled. This product has been
engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and / or fire. In order to prevent potential
danger, please observe the following instructions when installing, operating and
cleaning the product. To ensure your safety and prolong the service life of your
Liquid Crystal Television, please read the following precautions carefully before
using the product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade and the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightening storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
- 1 -
Advertisement
Need help?
Do you have a question about the PLCD3956A and is the answer not in the manual?
Questions and answers
there are some buttons in the directions but not corresponding with remote
The ProScan PLCD3956A TV follows NEC’s universal remote code, meaning a universal remote may require specific codes to function correctly. If some buttons do not match, it could be due to differences in remote programming, incorrect codes, or an incompatible universal remote.
This answer is automatically generated
won't turn on with remote or power button
The ProScan PLCD3956A may not turn on with the remote or power button due to several reasons:
1. Remote Issues:
- The batteries may be dead or not properly installed. Remove and reinstall the batteries after holding the power button for about 2 seconds.
- Ensure there is a clear line of sight between the remote sensor on the TV and the remote control.
2. Power Indicator:
- Check the indicator light. If it's red, the TV is plugged in but not on. If it's green, the TV is on.
3. Power Source:
- The TV must be connected to the correct power source. Using the wrong power source may cause failure to turn on.
- Make sure the power cord is securely connected and not damaged.
4. Safety Shutoff:
- If the TV was unplugged due to a lightning storm or for a long period, reconnect it and try powering it on again.
If none of these steps resolve the issue, the TV may require service.
This answer is automatically generated