Advertisement
Quick Links
Advertisement
Related Manuals for ProScan PLCD3956A
Summary of Contents for ProScan PLCD3956A
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and / or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. - Page 3 SAFETY INSTRUCTIONS This product is designed and manufactured to operate within defined design limits, and misuse may result in electric shock or fire. To prevent the product from being damaged, the following rules should be observed for the installation, use and maintenance of the product. Read the following safety instructions before operating the display.
- Page 4 • The wall socket should be installed near contact your dealer for repair. Continued the equipment and should be easily use of the product may cause fire or accessible. electric shock. • • Only the marked power source can be Do not install the product in an area with heavy dust or high humidity.
-
Page 5: Television Antenna Connection Protection
IMPORTANT INFORMATION Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. -
Page 6: Attaching Or Removing The Stand
Attaching or Removing the Stand To attach the stand, place the display unit flat on a table. Afterwards match the 4 pins on the neck to the 4 pin holes on the stand. - 5 -... -
Page 8: Identifying Front And Rear Panel
Identifying Front and Rear Panel Front View INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The light turns green when the TV is turned on. Because of the LCD in the panel, the TV might take 10 – 12 seconds to power on. -
Page 12: Tv Remote Control
TV Remote Control - 11 -... - Page 13 For universal remotes, this TV follows NEC’s universal remote code. You need to find the actual code from your cable or satellite or universal remote provider. POWER – Turns the TV on or off. GUIDE – Opens the current digital channel information guide (antenna only). MUTE –...
- Page 33 How do I clean the TV ? IMPORTANT The power cable has to be removed from the socket before cleaning the TV. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types of chemicals might damage the housing and the LCD glass. Cleaning the bezel and remote control Use a 100% cotton cloth or micro-fiber cloth for cleaning.
-
Page 34: Troubleshooting
Troubleshooting The following table contains the common problems and the solutions to these problems. Please check this list before you contact the technicians. Problems Solutions Connect power cord correctly. Turn on power. NO PICTURE Connect video cable correctly. Select the input signal source with proper cable connection with the source button. - Page 35 Problems Solutions TV CHANNELS ARE Check your auto lock function’s settings inside the OSD. You may BLOCKED have locked up some channels but forgot about them. Refer to page 34 for more instructions. UNIVERSAL REMOTE This TV follows NEC’s universal remote code. Please check your CODE hand book for NEC’s codes then apply them.
- Page 36 Problems Solutions SWITCHING A Different channels and inputs will sometimes have this effect CHANNEL OR because the channel signal’s own volume is already loud. SOURCE CHANGES There is no way remove this completely. The TV has an THE VOLUME AUTO VOLUME LEVEL function that can combat this type of effect.
-
Page 37: Specification
Specification Panel Specifications Aspect Ratio Widescreen 16:9 Pixel Pitch 0.36375 (H) x 0.36375 (V) mm per one triad Max. of Pixels (Resolution) HD (1366 x 768 pixels) ；FHD（1920x1080 pixels） Brightness 300 nits (Typical) Contrast 1000:1 (Typical) with Auto Contrast Enhancement Response Time 5 ms (gray to gray) Viewing Angle... - Page 38 (3) General Funtions Hybrid Tv Tuner NTSC / ATSC / QAM (Digital Cable Ready) Channel Auto Scan Sleep Timer (Minutes) Off / 5 / 10 / 15 / 30 / 60 / 90 / 120 / 180 / 240 Screen Size 39 inch Power requirement AC100-240V~ , 50/60Hz...
Need help?
Do you have a question about the PLCD3956A and is the answer not in the manual?
Questions and answers
won't turn on with remote or power button
The ProScan PLCD3956A may not turn on with the remote or power button due to several reasons:
1. Remote Issues:
- The batteries may be dead or not properly installed. Remove and reinstall the batteries after holding the power button for about 2 seconds.
- Ensure there is a clear line of sight between the remote sensor on the TV and the remote control.
2. Power Indicator:
- Check the indicator light. If it's red, the TV is plugged in but not on. If it's green, the TV is on.
3. Power Source:
- The TV must be connected to the correct power source. Using the wrong power source may cause failure to turn on.
- Make sure the power cord is securely connected and not damaged.
4. Safety Shutoff:
- If the TV was unplugged due to a lightning storm or for a long period, reconnect it and try powering it on again.
If none of these steps resolve the issue, the TV may require service.
This answer is automatically generated
there are some buttons in the directions but not corresponding with remote
The ProScan PLCD3956A TV follows NEC’s universal remote code, meaning a universal remote may require specific codes to function correctly. If some buttons do not match, it could be due to differences in remote programming, incorrect codes, or an incompatible universal remote.
This answer is automatically generated