Advertisement
(3) General Funtions
Hybrid Tv Tuner
Channel Auto Scan
Sleep Timer (Minutes)
Screen Size
Power requirement
Power consumption
Standby Power
Timing Support-Video
PC Timing
Multimedia Format
(4) Tuner Functions
NTSC
ATSC
(5) Input / Output Connections
Input Ports
Output Ports
*The product's specifications may change without notice or obligation.
**This manual's pictures and words are for references only and are subject to change without notice or
obligation. Inc is not liable for the misuse or misinterpretation of this manual.
NTSC / ATSC / QAM (Digital Cable Ready)
Yes
Off / 5 / 10 / 15 / 30 / 60 / 90 / 120 / 180 / 240
39 inch
AC100-240V~ , 50/60Hz
＜ 140W
Under 1W
480i / 480p / 720p / 1080i / 1080p
1920x1080@60Hz(Native)
1360*768@60 Hz
1024*768@60, 70, 75Hz
800*600@60, 75Hz
640*480@60, 75Hz
Audio: MP3 (32-48Khz)
Picture: JPEG (Baseline) up to 5000x5000
USB file system: FAT32/FAT16
Sound: Mono / Stereo / SAP
Favorite Channel
V-chip
Closed caption (CC1-CC4, Text 1-Text 4)
Favorite Channel
V-chip
Video input format: 1080i, 720p, 480p, 480i
Analog closed caption (CC1-CC4, Text 1-Text 4)
Digital closed caption (Service 1-Service 6)
1 input x TV Tuner (NTSC/ATSC)
1 input x AV (audio shared with YPbPr)
1 input x YPbPr (audio shared with AV)
3 inputs x HDMI/HDCP (optional, HDCP audio
shared with VGA Audio In)
1 input x VGA
1 input x VGA Audio In
1 input x USB
1 output x COAXIAL (digital audio) out
1 output x Audio Left/Right out
- 37 -
Advertisement
Need help?
Do you have a question about the PLCD3956A and is the answer not in the manual?
Questions and answers
there are some buttons in the directions but not corresponding with remote
The ProScan PLCD3956A TV follows NEC’s universal remote code, meaning a universal remote may require specific codes to function correctly. If some buttons do not match, it could be due to differences in remote programming, incorrect codes, or an incompatible universal remote.
This answer is automatically generated
won't turn on with remote or power button
The ProScan PLCD3956A may not turn on with the remote or power button due to several reasons:
1. Remote Issues:
- The batteries may be dead or not properly installed. Remove and reinstall the batteries after holding the power button for about 2 seconds.
- Ensure there is a clear line of sight between the remote sensor on the TV and the remote control.
2. Power Indicator:
- Check the indicator light. If it's red, the TV is plugged in but not on. If it's green, the TV is on.
3. Power Source:
- The TV must be connected to the correct power source. Using the wrong power source may cause failure to turn on.
- Make sure the power cord is securely connected and not damaged.
4. Safety Shutoff:
- If the TV was unplugged due to a lightning storm or for a long period, reconnect it and try powering it on again.
If none of these steps resolve the issue, the TV may require service.
This answer is automatically generated