System Settings - Teac LX-100 Series Instruction Manual

System Settings

System Settings
To specify settings of the LX operations, choose System from the Setup menu.
Specify the number of
quantization bits
Select sampling frequency
Record voice memos
Stop fan during recording
Lock the panel
Calibration
Set the clock
Apply the same channel
settings as the channel last
changed
Specify the number of
quantization bits
Select sampling frequency
Record voice memos
Stop fan during recording
Lock the panel
Calibration
Set the clock
Apply the same channel
settings as the channel
last changed
AD Width
Select either of 16 bits or 24 bits as a quantization bits.
Sample
Select the sampling frequency. Select the sampling frequency series, including the sampling frequency to be
selected at the upper row. Then, select the sampling frequency within the list shown at the lower row. They
are to be limited, based on the selected recording media and the tachometer pulse input channels. See
"Sampling Frequency and Number of Channels" on page 1-13.
for LX-110
Execute zero balance automatically when setting ST amp.
Adjust to PC clock before REC STANDBY
for LX-120
Execute zero balance automatically when setting ST amp.
Adjust to PC clock before REC STANDBY
Tabs for setting items
4-2
Enable the slot
Number of channels
recording at the slot 1
Settings for monitor output
channels
Setting for monitor output
range
Tabs for setting items
Enable the slot
Number of channels used
for recording
at the slot 1
Tachometer input
setting overview
Settings for monitor output
channels
Settings of monitor output
range and generator output
used for
channels