Connector Specifications; Digital Control Connector - Teac LX-100 Series Instruction Manual

Connector Specifications

DIGITAL CONTROL connector

<Functions>
Contact input:
Status output:
<Input/Output Circuit>
Input Format
Output Format
<Connector>
Angled half pitch 36-pin
Pin Assignment
Pin No.
1 GND
2 RESERVED
3 RESERVED
4 GND
5 RESERVED
6 RESERVED
7 GND
8 RESERVED
9 RESERVED
10 RTCADJIN
11 RECFWDIN
12 RECIN
13 FWDIN
14 STOPIN
15 PAUSEIN
16 EVENTIN
17 PLOCKIN
18 GND
For PANEL LOCK input, the control buttons on the front panel of the LX cannot be used to perform operations.
The first signal locks the control buttons; the second signal releases the lock.
REC FWD, REC, FWD, STOP, PAUSE, event, panel lock, and internal clock
adjustment
REC, FWD, STOP, PAUSE, event, and panel lock
L level: 0.4 V or less
H level: Open or 2 V or more
Pulse width: 100 ms or more
Open drain, maximum sync current: 8 mA
DHA-RC36-R1xxx series
Signal Function
Ground
Reserved
Reserved
Ground
Reserved
Reserved
Ground
Reserved
Reserved
Internal clock
ADjustment input
REC FWD input
REC input
FWD input
STOP input
PAUSE input
EVENT input
Panel Lock input
Ground
100 msec
or more
Lock
6-25
Connector Specifications
Pin No. Signal
19 GND
20 RESERVED
21 RESERVED
22 AGND
23 AGND
24 AGND
25 AGND
26 RESERVED
27 RESERVED
28 NC
29 NC
30 RECSTS
31 FWDSTS
32 STOPSTS
33 PAUSESTS
34 EVENTSTS
35 PLOCKSTS
36 GND
1 sec or more
Release
Function
Ground
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
REC output
FWD output
STOP output
PAUSE output
Event output
Panel Lock output
Ground