Output - Roland VR-50HD Reference Manual

Menu-Screen Parameter List
5/6–11/12
Parameter Value
Follow
OFF,.ON
Solo
Mute
Input LINE,.VIDEO
Level -INF–0 .0–+6 .0.dB
Delay 0.0–500 .0.ms
AUX Send -INF–0 .0–+6 .0.dB
AUX Delay 0.0–500 .0.ms
Reverb Send 0–127
OFF,.ON
Mono
Equalizer
OFF,.ON
ON/OFF
High -15–0–+15.dB
Frequency 700.Hz–8 kHz–11.kHz
Mid -15–0–+15.dB
Frequency 20 . 0 .Hz–2.50 kHz–10 . 0 .kHz
Q
0 .5–1.0–16 .00
Low -15–0–+15.dB
55.Hz–110 Hz–800.Hz
Frequency

Output

Parameter Value
MAIN
Level -INF–0 .0–+6 .0.dB
AUX
Level -INF–0 .0–+6 .0.dB
Output Bus
AUDIO MAIN MAIN,.AUX
AUDIO AUX MAIN,.AUX
SDI PGM MAIN,.AUX
SDI AUX MAIN,.AUX
MAIN,.AUX
HDMI PGM
HDMI AUX
MAIN,.AUX
PHONES MAIN,.AUX
4
Explanation
This.switches.the.Audio.Follow.function.on.or.off .
When.listening.to.audio.through.headphones,.you.can.hear.just.the.channels.for.which.this.value.is.set.to.ON .
This.mutes.the.audio.on.the.selected.channel .
This.selects.the.channel's.audio.input.source .
LINE:. Analog.audio.incoming.via.the.LINE.jacks.on.the.rear.panel.is.input .
VIDEO:. Audio.embedded.in.video.is.input ..VIDEO.is.enabled.when.SDI.or.HDMI.has.been.selected.for.
Input.Assign .
This.adjusts.the.level.sent.to.the.MAIN.bus ..You.can.also.use.the.channel.faders.on.the.top.panel.to.adjust.this .
This.adjusts.the.amount.of.delay.for.correcting.audio.that.is.out.of.sync.with.the.video.(lip-sync) .
This.adjusts.the.level.sent.to.the.AUX.bus .
This.adjusts.the.amount.of.delay.for.correcting.audio.and.video.sent.to.the.AUX.bus.that.are.out.of.sync .
This.sets.the.amount.of.reverb.applied .
This.sends.the.left-channel.audio.to.the.left.and.right.channels;.the.right-channel.audio.is.no.longer.heard .
This.switches.the.equalizer.on.and.off .
This.sets.the.gain.of.the.high-frequency .
This.sets.the.center.of.the.frequency.that.will.be.adjusted.by.the.High .
This.sets.the.gain.of.the.middle-frequency .
This.sets.the.center.of.the.frequency.that.will.be.adjusted.by.the.Mid .
This.sets.the.width.of.the.area.affected.by.the.equalizer.centered.at.the.Mid-Frequency ..
Higher.values.will.narrow.the.area .
This.sets.the.gain.of.the.low-frequency .
This.sets.the.center.of.the.frequency.that.will.be.adjusted.by.the.Low .
Explanation
This.adjusts.the.output.level.of.the.MAIN.bus ..You.can.also.use.the.[MAIN].fader.on.the.top.panel.to.adjust.
this .
This.adjusts.the.output.level.of.the.AUX.bus .
This.selects.whether.the.signals.of.the.PGM.bus.or.the.signals.of.the.AUX.bus.are.output.via.the.various.
output.connectors .
You.select.from.among.SDI.PGM–HDMI.AUX.when.audio.input.from.HDMI.or.SDI.has.been.assigned.to.
channels.5/6–11/12 .