Making Cable Connections
To connect the video and power cables, see Figure 6 and perform the
Attach the monitor's video in BNC connector to the camera's
VIDEO OUT connector.
With a screwdriver, loosen the ~AC24V terminal connectors on the
Connect the leads of the power source to the ~AC24V terminal
Tighten the terminal connector screws until snug, ensuring that the
power leads are secure.
Provide power to the camera.
Note: The power LED should be illuminated once power is supplied to the camera. If the
power LED is not illuminated, check the terminal block connections and power source.
Figure 6. Power and video connections
KTC Compact Cameras
1040206A / December 2002