Beko 32" User Manual page 24

9.4-Connecting an external device via YPBPR connection
YPBPBR (Component Input): When a connection is made via YPBPR socket, select YPBPR option
from the Source menu and press the OK button to display the picture. Your TV will switch to the
selected source.
Note:Only 16:9, 4:3, 14:9, Letterbox and Subtitle (some definitions) are supported as picture format in
YPBPR mode.
9.5-Connecting an external device via HDMI connection
HDMI: When a connection is made via HDMI socket, select the HDMI input you connected through from
the Source menu and press the OK button to be able to display these pictures. Your TV will switch to
the selected source.
Connect to the HDMI input at the back of your TV by using the connector located on your PC or your
digital video-transmission device with a suitable cable (not supplied with the TV).
Note: To be able to watch an image in the HDMI mode, your computer must be equipped with a HDMI
graphic card.
You may display the resolution information by pressing the İ button.
9.5.1-HDCP
Your TV supports HDCP feature. To use this feature, you must set up a connection to your TV set's HDMI
video port and select HDMI by pressing the AV key on your remote control.
Rear view of the TV
Audio connection
Picture connection
23 I
EN
DVD
DVD
SATALLITE RECEIVER
GAME CONSOLE