Program Table - Beko 32" User Manual

6.3-Program Table

Press the M button. Move to the PROGRAM
TABLE tab by pressing the Down movement
button in Main Menu and confirm your selection
with the OK button. Program Table menu will be
displayed.
PROGRAM TABLE
00
01 CHANNEL
02 CHANNEL
03
04
SKIP
MOVE
SELECT
6.3.1-Switching the locations of the
stored channels
Select the program you would like to
relocate by pressing the Up/Down or
Left/Right movement buttons. Press
the "GREEN" button. Green will blink.
Move to the other program you would
like to relocate by pressing the up/down
or right/left movement buttons. Finish
the relocation process by pressing the
"GREEN" colored button. The channel in the first
program number you selected has been moved
to your second selected program number and
the channels between both program numbers
have been shifted to the initially selected program
number. After setting is complete, press the EXIT
button to exit the menu.
6.3.2-Deleting a stored channel
Select the program you would like to
delete by pressing the up/down or
right/left movement buttons. Press the
"BLUE" button. The blue button on the
menu will blink for approval. You may
perform the deletion process by pressing
the "BLUE" button or you may abort
the deletion process by pressing the M button.
Once you pres the "BLUE" button, the selected
program is deleted and the following channels are
transferred to after this program number. After
setting is complete, press the EXIT button to exit
the menu.
05 10
06 11
07 12
08 13
09 14
NAME
DELETE
BACK
6.3.3-Skipping a stored channel
In the event that you do not wish to
see certain programs while navigating
through the channels using the PR+/
PR- buttons, then you can use this
function. Select the program that will be hidden
by pressing the up/down or right/left movement
buttons. Press the "RED" button. The name of the
program to be skipped shall appear in red. You
may perform this procedure for more than one
program. To view the skipped program, directly
enter the program number using the numeric
buttons. To cancel the program skipping process,
press again the "RED"" button. After setting is
complete, press the EXIT button to exit the menu.
6.3.4-To name the channels
You can assign your program or
programs of choice the names that have
a maximum of five characters. Select the
program you would like to name from the
Program Table by pressing the up/down
or right/left movement buttons. Press
the "YELLOW" button. An empty space
appears beside the channel for which you would
like to specify name information. Here, choose the
desired letter, number or sign using the up/down
movement buttons. For the second character,
press the right movement button and then select
the desired letter, number or sign again with the
up/down movement buttons. After entering all the
characters, store the name you have written in the
memory by pressing the "YELLOW" button. To
write names for any of the other programs, simply
repeat the above procedure. If you want to exit
the menu, simply press the EXIT button. If the
program is not named, then the channel number of
that program will be displayed automatically.
13 I
EN