Clean And Mentenance; 13-1.Overall Condition Of Appliance; 13-2.Dishwasher Salt; 13-3.Rinse-Aid - Haier DW12-TFE3 Series Service Manual

Service Manual
Issue
Model No.DW12-TFE3 Series
Rev.

13. Clean and mentenance

Regular inspection and maintenance of your appliance helps to prevent problems from
occurring.This saves time and aggravation.You should therefore carefully inspect the inside of
your dishwasher from time to time.

13-1.Overall condition of appliance

Check that no grease or scale has accumulated on the inside of the dishwasher.
If you discover any deposits:
Clean the interior of the dishwasher thorughly with a detergent solution.

13-2.Dishwasher salt

Check the LOW SALT indicator " I" .Top up with salt, if required.

13-3.Rinse-aid

Check the LOW RINSE AID indicator " H ", on the front panel. Top up
with rinse-aid,if required.

13-4.Filters

The filters " 8"," 9" prevent larger particles of food in the
water from reaching the pump.These particles may
occasionally block the filters.
8
When the appliance has finished washing, check the
filters for particles of food and, if required, clean.
After undoing the coarse micro-filter " 8 " , the filter unit
" 9" can be removed. Remove any particles of food and
rinse the filters under running water.
9
Insert the filter unit " 9 " and tighten the coarse microfilter.

13-5.Spray arms

Lime and remnants of food in the washing water can block the
10
nozzles in the spray arms " 10 " and " 11 " and the arm mountings.
11
Inspect the nozzles in the spray arms for blocked holes due to
remnants of food.
If necessary, pull the lower arm " 11 " upwards and lift it off.
Unscrew the upper spray arm " 10 ".
Clean both spray arms under running water.
Refit the spray arms. Ensure that the lower arm has locked into place
and the upper one is screwed tight.
36