Haier DW12-TFE3 Series Service Manual page 15

Service Manual
Issue
Model No.DW12-TFE3 Series
Rev.
Connection method: there are several
corresponding number marks on the
component at the position of 1,2,3 showing
on the left picture.
Connect the pipe together. Attention: pipe
must be put on the interspaces between
vent hole and the tub.
Put the pressure switch wedge into the
large ringent slot part and then push it
until to the slot bottom.
Put the pipe to the smaller ringent place of
its bottom and then the installation is
completed.
14