General Cleaning; Cleaning Pca's - Fluke 5725A Instruction Manual

General Cleaning

To keep the 5725A looking like new, clean the case, front panel, and rear panel using a
soft cloth slightly dampened with water or a non-abrasive mild cleaning solution that
does not harm plastics.
Do not use aromatic hydrocarbons or chlorinated solvents for
cleaning. They can damage the plastic materials used in the
amplifier.

Cleaning PCA's

Printed circuit assemblies only need cleaning after repair work. After soldering on a pca,
remove flux residue using isopropyl alcohol and a cotton swab.
Figure 6-2. Accessing the Air Filter
Caution
Maintenance
6

General Cleaning

aq14f.eps
6-4.
6-5.
6-5