Where To Go From Here - Fluke 5725A Instruction Manual

5725A
Instruction Manual

Where to Go From Here

This manual is the operator and service manual for the 5725A. However, because the
5725A operates under the control of the 5700A Calibrator, most operating instructions
for the 5725A are in the 5700A manuals. Topics such as selecting output values,
connecting to a UUT (Unit Under Test), and self calibration are covered in the 5700A
Operator Manual. The list below gives some specific pointers, and the text further on
describes how to use all the manuals to find 5725A information.
For More Information About:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1-4
Unpacking and setup
Installation and rack mounting
AC line power and interface cabling
Controls, indicators, and binding
posts
5725A service information
Operating the amplifier
Cabling to a Unit Under Test
Self calibration
Full verification
IEEE-488 or serial remote operation
5700A/5725A specifications
Theory of operation
Troubleshooting
Ordering a part
Refer To:
Section 2 of this manual
Section 2 of this manual and the
Y5735/Y5737 Instruction Sheet
Section 2 of this manual
Section 3 of this manual
Sections 4 through 9 of this manual
Section 3 of this manual and Section 4 of
the 5700A Operator Manual
Section 4 of the 5700A Operator Manual
Section 7 of the 5700A Operator Manual
Section 3 of the 5700A Service Manual
Section 5 of the 5700A Operator Manual
Section 1 of this manual
Section 4 and 9 of this manual
Section 6 of this manual
Section 8 of this manual
1-2.