Introduction; How To Obtain Parts; Manual Status Information; Newer Instruments - Fluke 5725A Instruction Manual

Amplifiers
Hide thumbs Also See for 5725A:
Table of Contents

Advertisement

Introduction

This chapter contains an illustrated list of replaceable parts for the 7-300, 7-600, 12B,
and 18 Meters. Parts are listed by assembly; alphabetized by reference designator. Each
assembly is accompanied by an illustration showing the location of each part and its
reference designator. The parts lists give the following information:
Reference designator
An indication if the part is subject to damage by static discharge
Description
Fluke stock number
Total quantity
Any special notes (i.e., factory-selected part)
A
symbol indicates a device that may be damaged by static
*
discharge.

How to Obtain Parts

Electrical components may be ordered directly from the manufacturer by using the
manufacturers part number, or from the Fluke Corporation and its authorized
representatives by using the part number under the heading FLUKE STOCK NO. In the
U.S., order directly from the Fluke Parts Dept. by calling 1-800-526-4731. Parts price
information is available from the Fluke Corporation or its representatives. Prices are also
available in a Fluke Replacement Parts Catalog which is available on request.
In the event that the part ordered has been replaced by a new or improved part, the
replacement will be accompanied by an explanatory note and installation instructions, if
necessary.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
Instrument model and serial number
Part number and revision level of the pca containing the part.
Reference designator
Fluke stock number
Description (as given under the DESCRIPTION heading)
Quantity

Manual Status Information

The Manual Status Information table that precedes the parts list defines the assembly
revision levels that are documented in the manual. Revision levels are printed on the
component side of each pca.

Newer Instruments

Changes and improvements made to the instrument are identified by incrementing the
revision letter marked on the affected pca. These changes are documented on a
supplemental change/errata sheet which, when applicable, is included with the manual.
Caution
List of Replaceable Parts
8-1.
8-2.
8-3.
8-4.
8
8-3

Advertisement

Table of Contents
loading

Table of Contents