Modem Support (RangeLAN2 752x Only)
The RangeLAN2 752x Access Point may be remotely configured via a dial-up modem.
To allow for this type of configuration:
1. Configure the modem from a terminal or terminal emulation program at 9600
bps.
2. Issue the following commands to the modem:
ATS0=1
AT&D0
ATE0
ATQ1
AT&W0
3. Attach a modem via a straight-through cable to the RangeLAN2 752x Access
Point.
4. From a remote modem, dial the phone number of the modem connected to the
RangeLAN2 752x Access Point.
5. After the RangeLAN2 752x Access Point's modem has answered the phone,
press <Enter> on the terminal connected to the remote modem until you see the
configuration menu tree .
Main Menu
After using one of the above three methods, you will see the following software menu
whose choices will be described in the next chapters:
(Auto-answer after 1 ring)
(Ignore DTR)
(No local echo)
(Suppress result codes)
(Store configuration in non-volatile memory)
23