Quick Installation - Proxim RANGELAN2 7510 User Manual

You may follow the quick installation steps if the following conditions are true:
There will only be one Access Point on this network
You will use all the software default values
You do not need to configure an IP address for the Access Point and do not
intend to manage it via telnet or a Web browser
You will not be setting security IDs on your network
If the above conditions are not true, more detailed configuration information is described
in Chapter 5.
If your installation meets the preceding criteria, proceed with the following instructions:
1. Firmly screw in clockwise the antenna onto the antenna connector on the back
panel of the Access Point.
Note
Government regulatory agencies mandate that the antenna not be alterable.
Therefore, RangeLAN2 Access Point uses a custom antenna connector. Do
not attempt to use a different antenna or you may damage the connector and
the Access Point unit.

2. Quick Installation

7