Av1/Av2 - Panasonic CQ-VD5005U Operating Instructions Manual

AV1/AV2

Preparation:
¡Connect an optional external device to the AV1/AV2.
Source Selection
29
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
q Touch "Source Button".
d
Press [SOURCE] to change to the
desired mode.
To switch Operation Screen ON, touch the center of
touch panel.
Note:
¡You can set up the system so that the AV mode is not
selected (source skip). (
¡If no operation is performed for 10 seconds or
is touched, the operation buttons disappear.
¡Only the pin jack of the supplied Conversion Cable for
AV 1 IN or a pin jack that has the same electrode
arrangement can be connected to the AV 1 IN terminal.
(See Fig. 1.)
¡Use of the supplied Conversion Cable for AV 1 IN or an
audio pin jack that has the same electrode arrangement
also allows users to enjoy only music. In this case, the
screen background becomes black.
30
CQ-VD5005U/L
w Touch
/
(AV1/AV2) on the
Source Selection
Screen.
page 35)
a
Input Select
Source Button
DIMMER
IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER
CQ-VD5005U
DIMMER DIM
CQ-VD5005W
VOL POWER TUNE/TRACK
SEL
MUTE SETUP
PUSH
SOURCE SOURCE
[SOURCE]
<Fig. 1>
Audio (L)
Audio (R)
Video
Ground
TILT CLOSE
TEXT
TILT OPEN
AV1 IN
AV1 IN