Maintenance - Panasonic CQ-VD5005U Operating Instructions Manual

❑
Product Servicing
If the suggestions in the charts do not solve the problem,
we recommend that you take it to your nearest authorized
Panasonic Servicenter. The product should be serviced
only by a qualified technician.
❑
Replacing the Fuse
Use fuses of the same specified rating (15 A). Using dif-
ferent substitutes or fuses with higher rating, or connect-
ing the product directly without a fuse, could cause fire or
damage to this unit.
If the replacement fuse fails, contact your nearest
Panasonic Servicenter for service.

Maintenance

❑
Cleaning this Unit
Your product is designed and manufactured to ensure a
minimum of maintenance. Use a dry soft cloth for routine
exterior cleaning. Never use benzine, thinner or other sol-
vents.
Alcohol Alcohol
Thinner
Thinner
Benzine
Benzine
Pesticide
Pesticide
Wax
Wax
❑
If the Unit Begins to
Malfunction...
Reset switch
Remove the face plate (a page 13) and insert a hard,
slender stick into the hole and push the switch.
Important
Push the switch only when the unit fails to operate with
any buttons. (Stored settings and adjustments are not
cleared.)
If the unit fails to return to normal condition, call the near-
est Panasonic Servicenter and ask for repairs.
CQ-VD5005U
Note:
¡ If the ID-CODE has been already set, you will be asked
to enter the ID-CODE right after the unit is restarted.
To remove stubborn stains
1
Moisten the soft cloth in dishwashing
soap diluted with water and wring well.
2
Wipe lightly. Go over the same surface
with a dry cloth.
Note:
¡Since there is the possibility of water drops getting
inside of the unit, do not directly apply cleanser to the
surface.
¡Do not scratch the screen with your nails or other hard
objects. The resulting scratches or marks will obscure
the images.
Caution
¡If water drops or similar wet substances get inside
the monitor, it may cause a malfunction.
44
TILT OPEN
AV1 IN
Reset switch
45
CQ-VD5005U/L