Av1/Av2 - Panasonic CQ-VW100W Operating Instructions Manual

AV1/AV2

Preparation:
¡Connect an optional external device to the AV1/AV2.
Source Selection
25
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
q Touch "Source Button".
d
Press [SRC/PWR] to change to the
desired mode.
To switch Operation Screen ON, touch the center of
touch panel.
Note:
¡You can set up the system so that the AV mode is not
selected (source skip). (
¡If no operation is performed for 10 seconds or
touched, the operation buttons disappear.
26
CQ-VW100W
w Touch
/
(AV1/AV2) on the
Source Selection
Screen.
a page 31)
Input
is
Source Button
CQ-VW100W
MUTE VOL DIMMER SRC / PWR SRC / PWR
[SRC/PWR]
MAP TUNE/TRCK TILT