Setting The Time Constant - Kanomax Anemomaster 6036 User Manual

*Time constant can
be set only for Air
Velocity and
Volumetric Flow
measurements.
*The time constant
selected from 1, 5,
10 and 20 seconds
will be initialized
once the power is
turned off, and will
return to the
default setting of 1
second.

Setting the Time Constant

When there is rapid change in the measurement data, the readings
may become difficult to read. In such case, the speed of updating
the readings can be reduced by changing the time constant setting.
Time Constant determines the time span of the moving average.
When a larger (longer) time constant is selected, the readings will
be rather stable, and when a smaller (shorter) time constant is
selected, the readings will be more responsive and sensitive to the
change.
The time constant can be selected from 1, 5, 10 or 20 seconds.
Time Constant
EXAMPLE: when setting the time constant to 20 seconds:
Select the time constant "20.0" by pressing
press the key.
< Time Constant Setting Screen >
By pressing the
measurement mode, the display
switches to the time constant setting
screen.
Time cons. unit
key in a
keys, and
17