Final Work - Webasto Mazda 3 MPS Installation Instructions Manual

Final Work

WARNING!
Reassemble disassembled components in reverse order.
Check that all hose lines, clips, and all electrical connections are securely fastened.
Secure all loose cables using cable clips.
Only use manufacturer-approved coolant.
Spray heating unit components with anti-corrosion wax (Tectyl 100K, Order No. 111329).
- Connect battery.
- Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
- Set the time switch.
- Set the manual air conditioning or automatic air conditioning according to the "operating
instructions for the end customer".
- Check that the auxiliary heating operates properly, see operating instructions / installation
instructions.
- Attach the "Switch off auxiliary heating before re-fuelling" sticker onto the left side of the B-pillar.
1
1311472A
54
1
55
2
Printed in Germany
1 Hole Ø 42mm
2 Lower engine cover
2
Assemble the lower engine cover 1 , insert red
rubber profile with nut 2 .
Webasto AG
PO Box 80 - 82132 Stockdorf
Hotline 01805 / 932278 - Hotfax 0395 / 5592-353
http://www.webasto.de
10/2006
Mazda 3 MPS
Feel the drive
Press: Steffen
Cut out the
underride
protection
Inserting
rubber
profile