Sd Card Slot - Toshiba Portege R100 User Manual

2 Troubleshooting

2.13 SD card slot

To check if the SD card/Smart Media slot is good or no good, follow the troubleshooting
procedures below as instructed.
Procedure 1 Check on Windows
Procedure 2 Connector/Replacement Check
Procedure 1 Check on Windows
Insert a SD card into the slot. Check if the installed Windows XP recognizes automatically the
SD card and the data in the SD card can be read.
If the card is nor recognized or data are not read, go to Procedure 2.
Procedure 2 Connector/Replacement Check
The SD card is connected to the connector PJ364 of the System board.
SD card
Check 1 Check the SD card is firmly inserted to the connector PJ2210 of the System board.
If not, insert it firmly. If the SD card is still not functioning properly, perform
Check 2.
Check 2 The SD card may be faulty. Replace it with a new one in order. If the problem
persists, perform Check 3.
Check 3 The System board may be faulty. Replace it with a new one.
2-46
System board
P2210
PORTEGE R100 Maintenance Manual (960-440)
2.13 SD card slot