Table of Contents
Advertisement
Signamax Connectivity System
GSM
On
Flashing
SMS
ON
Flashing
1.4.3 Rear Panel Descriptions
Port
Port
Port
Port
Phone
Line
GSM
Antenna
Connector
WAN
Reset
Power
www.signamax-us.com
GSM Network is found and working properly
Searching GSM Network
Short message waiting Indicator
Sending short message
Description
Description
Description
Description
Phone port can be connected to analog telephone sets or Trunk Line
of PBX
Can be Connected to PBX or CO line with RJ-11 analog line. PSTN not
FXO port, can't connect PSTN to VoIP,. When PSTN call comes, it will
transfer to FXS port, let FXS can pick up call from VoIP or PSTN.
The port which you can Insert SIM Card
Connect the antenna to the gateway.
Connect to the network with an Ethernet cable. This port allows your
ATA to be connected to an Internet Access device, e.g. router, cable
modem, ADSL modem, through a networking cable with RJ-45
connectors used on 10BaseT and 100BaseTX networks.
Push this button until 3 seconds, and ATA will be set to factory
default configuration.
A power supply cable is inserted
065-9066
www.signamax-eu.com
Advertisement
Table of Contents
