SignaMax 065-9066 User Manual page 11

Signamax Connectivity System
A A A A ppurtenances: ppurtenances: ppurtenances: ppurtenances:
2.2 Installation 2.2 Installation 2.2 Installation 2.2 Installation
1. 1. 1. 1. Install Install Gateway Gateway
Install Install Gateway Gateway
1 Connect the 12V DC IN to the power outlet with power adaptor.
2 Connect Line to PSTN Line.
3 Connect Phone port to a telephone jack with the RJ-11 analog cable (Phone / PBX Trunk Line.)
4 Connect the antenna to the Antenna Connector.
5 Insert SIM card to the gateway
Warning: to avoid the product damaged, please insert SIM card before
power-on, and power-off first if it is necessary to take SIM card out of the
product.
2. 2. 2. 2. Setting Setting Setting Setting up up the network up up the network environment for configuration the network the network
- To be able to enter the configuration system via web or telnet.
1. Connect the Ethernet cable (with RJ-45 connector) to WAN port.
GSM Gateway ----- RJ45 directly link ----- PC
www.signamax-us.com
CD ROM CD ROM
CD ROM CD ROM
CD Include in all
datasheet.
RJ RJ RJ RJ- - - - 45 cable 45 cable
45 cable 45 cable
Internet cable RJ-45 connect to NIC/Gateway/Router
Antenna Antenna Antenna Antenna
This Antenna frequency is 900MHz/1800,1900Mhz
for automobile.
Power supply Power supply Power supply Power supply
Power Supply,input:100-240V output:+12V
(Europe/UK/US)
environment for configuration environment for configuration environment for configuration
product user manual
065-9066
and
www.signamax-eu.com