Table of Contents
Advertisement
Signamax Connectivity System
[Telephone Advance]
[Telephone Advance]
[Telephone Advance]
[Telephone Advance]
Item
Item
Item
Item
Silence Compression:
Silence Compression:
Silence Compression:
Silence Compression:
(VAD)
(VAD)
(VAD)
(VAD)
Voice Codec option:
Voice Codec option:
Voice Codec option:
Voice Codec option:
Dial Complete Tone:
Dial Complete Tone:
Dial Complete Tone:
Dial Complete Tone:
Dial Termination key:
Dial Termination key:
Dial Termination key:
Dial Termination key:
FXS Impedance:
FXS Impedance:
FXS Impedance:
FXS Impedance:
Phone (Line) in/out
Phone (Line) in/out
Phone (Line) in/out
Phone (Line) in/out
volume:
volume:
volume:
volume:
www.signamax-us.com
Description
Description
Description
Description
If this function is enabled, when silence is occurred for a
period of time, no data will be sent across the network
during this period in order to save bandwidth. (If you use
Asterisk, please disable Silence Compression, it maybe
make you call disconnect.)
The Codec is used to compress the voice signal into data
packets. Each Codec has different bandwidth requirement.
There are four kinds of Codec, G.723, G.729AB, G.711_u
and G.711_A. The default value is G.723.
When you use the VoIP call, you will heard "DuDu" voice that
is dial complete tone. If you don't want to heard that tone ,
you can disable it.(default is enable).
Setting Termination key to speed up VoIP dial. Select "*" or
"#" to Termination key.
The FXS provides 600/900 OHM impedances for selection.
You can adjust the Phone (Line) in/out volume, range from
-9db to 9db.
(If you adjust too bigger, maybe generation some ECHO or
noise)
065-9066
www.signamax-eu.com
Advertisement
Table of Contents
