Table of Contents
Advertisement
Signamax Connectivity System
[1]Advanced Setup
[1]Advanced Setup
[1]Advanced Setup
[1]Advanced Setup
......7.Hot Line Setting
[2] System Administration.
[2] System Administration.
[2] System Administration.
[2] System Administration.
2.3.4 Web User Interface
Connecting to the Web Configuration via a Web Browser
Connecting to the Web Configuration via a Web Browser
Connecting to the Web Configuration via a Web Browser
Connecting to the Web Configuration via a Web Browser
1. Launch the Web browser (IE or Firefox). Enter http://
window and press the Enter Key
2. An authentication dialog box will open.
3. If this is a first time setup of the router, type "admin"
field as "admin"
admin". Click OK
admin"
admin"
4. The Web Configuration Setup Main Menu will open. On the main page [GSM Setup], [Advanced
Setup] and [System Information] were displayed.
www.signamax-us.com
2.Change Codec
3.Enable/Disable UK PSTN Tone Detection?
4.Enable/Disable Dial Complete Tone
5.Dial Termination Key Setting
6.FXS Parameters Setting
1.Change FXS Impedance
2.Change Phone In Volume
3.Change Phone Out Volume
4.Flash Detection
5.Ring Frequency
6.FXS Battery reversal generation
(3)Network Advance
(3)Network Advance
(3)Network Advance
(3)Network Advance
1.Disable Smart QOS
2.Bandwidth Control
3.G.723 Bandwidth
4.G.729 Bandwidth
5.Set IP TOS
1.Change Port1 Hot Line Number
2.Change Port2 Hot Line Number.......(To your own port)
1.Save Configuration
2.Access Control
3.Set to Default
4.System Information
5.NTP Setting
6.Syslog Setting
OK.(Default username/Password is "admin")
OK
OK
http://192.168.1.1
192.168.1.1 into the browser Address
http://
http://
192.168.1.1
192.168.1.1
admin" as the User Name and the Password
admin"
admin"
065-9066
Address
Address
Address
www.signamax-eu.com
Advertisement
Table of Contents
