Table of Contents
Advertisement
Signamax Connectivity System
4.1.3 Network Management
Network Management,, access port configuration allows you to modify the HTTP port or
TELNET port for accessing VoIP gateway
(Default Parameter : HTTP Port is 80 ; TELNET Port is 23)
Http Server Port: Input you want to change Web access port (Default is 80)
Http Server Port:
Http Server Port:
Http Server Port:
Telnet Server Port:
Telnet Server Port: Input you want to change telnet access port (Default is 23)
Telnet Server Port:
Telnet Server Port:
4.2 VoIP Setup
GSM Gateway support 2 VoIP protocol - H.323 / SIP, you can register to H.323 Gatekeeper or
SIP proxy server. Gateway is not a softswitch
same time! If you don't register GK or Proxy server, you can make Peer to Peer call by IP address
or domain name (Setting Dialing plan).
4.2.1 H.323 Setup
Gateway H.323 protocol support H.323 (v2/v3/v4), H.225, Q.931, H.245 and RTP/RTCP. Don't
support H.235 security
H.235 security, can't use H.235 security Authentication Username / Password. H.323
H.235 security
H.235 security
protocol is not good at pass NAT/Firewall, the best way is installed gateway on Public IP Address
when it use H.323.If you want to under NAT, gateway support NAT pass function when you use
the same S Series Gateway. Other band gateway doesn't promise this function can work fine!
www.signamax-us.com
not a softswitch, it only can use 1 VoIP protocol (SIP/H.323) at the
not a softswitch
not a softswitch
065-9066
www.signamax-eu.com
Advertisement
Table of Contents
