SignaMax 065-9066 User Manual page 4

Connectivity systems gsm gateway

Table of Contents

Signamax Connectivity System

PREFACES

0.1 About This Manual

0.1

About This Manual

0.1

About This Manual

This manual is designed to assist users in using GSM Gateway. Information in this document

has been carefully checked for accuracy; however, no guarantee is given as to the correctness of

the contents. The information contained in this document is subject to change without notice.

0.2 Copyright Declarations

information that is protected by copyright. No part may be reproduced, transmitted, transcribed,

stored in a retrieval system, or translated into any language without written permission from the

0.3 Trademarks

Products and Corporate names appearing in this manual may or not be registered tradem

arks or copyrights of their respective companies, and are used only for identification or ex

planation and to the owners' benefit, without to infringe.

0.4 Safety Instructions

The most careful attention has been devoted to quality standards in the manufacture of the

Gateway. Safety is a major factor in the design of every set. But, safety is your responsibility too.

Use only the required power voltage. Power Input: AC 100-240V, 50-60Hz

To reduce the risk of electric shock, do not disassemble this product. Opening or removing

covers may expose the Gateway to hazardous voltages. Incorrect reassembly can cause

electric shock when this product is subsequently used.

Never push objects of any kind into the equipment through housing slots since they may

touch hazardous voltage points or short out parts those could result in a risk of electric

shock. Never spill liquid of any kind on the product. If liquid is spilled, please refer to the

proper service personnel.

Use only Unshielded Twisted Pair (UTP) Category 5 Ethernet cable to RJ-45 port of the

Gateway.

www.signamax-us.com

065-9066

www.signamax-eu.com

Table of Contents