Table of Contents
Advertisement
Signamax Connectivity System
065-9066
(Your particular system will be different from the screen shown here.)
Check that you have an Ethernet network card installed. If not, refer to the card
manufacturer's documentation and install the card and drivers.
If your card is installed,
1. Click the Add button. The Select Network Component Type dialog box will open. The box
will show four options:
Client, Adapter, Protocol, and Service.
2. Select Protocol and click the Add button. The Select Network Protocol dialog box will open.
3. Select Microsoft in the left scrolling window then selects TCP/IP in the right, and click OK.".
You will be returned to the Network dialog box.
www.signamax-us.com
www.signamax-eu.com
Advertisement
Table of Contents
