Glow-worm Ultrapower 100sxi Installation And Servicing page 41

Diagnostic Menu - Level 1 Installer Access
Description
Domestic hot water flow temperature reading
Tank temperature
Heating temperature setpoint
Domestic hot water setpoint
Tank setpoint
control
Domestic hot water demand
d.24 System water pressure
d.27 Option Relay 1
d.28 Option Relay 2
Outside temperature
d.91 Internal Programmer type
d.92 Enable/Disable Internal Programmer
d.99 State List
Indicates read and write function - all other diagnostics are read only
13 Fault Finding
Range
intelligent
in bar.
Reserved for future use
Reserved for future use
Minutes
Ignitions / 100
Ignitions / 100
0:24 hour
0: CH Off, DHW Off
1: CH Off, DHW On
2: CH On, DHW Off
3: CH On, DHW On (Default)
(see table opposite)
> 80 no flame < 40 good flame
1:7 day (default)
Diagram 13.5
41