The Causes And Solutions Of Bad Discharge; Wrong Print Position; Jam 0 - Ricoh G186 Service Manual

The Causes and Solutions of Bad Discharge

4.3 THE CAUSES AND SOLUTIONS OF BAD
DISCHARGE

4.3.1 WRONG PRINT POSITION

Description:
Printing begins at the wrong position on the paper.
Check and Cause
Wrong sensing time caused by defective
feed sensor actuator.

4.3.2 JAM 0

Description:
1. Paper does not exit the cassette.
2. Jam-0 occurs if the paper feeds into the printer.
Check and Cause
1. Check the Main clutch by using EDC
Mode.
2. Check if the pad is loose due to bad
sealing of the side-pad.
3. Check the surface of the roller-pickup
G186
Solution
Replace the defective feed sensor actuator.
Solution
1. Replace the Main clutch.
2. Replace the side-pad Assembly L or R,
if necessary.
3. Clean with soft cloth dampened with
IPA (Isopropyl Alcohol) or water.
4-14 SM