Playing Back To An External Recorder - Black Box TE110A User Manual

CHAPTER 7: Using the Recorder with External Equipment

7.3 Playing Back to an External Recorder

To play back from the Digital Voice Recorder to an
external audio recording device such as a tape recorder
or DAT recorder, take these steps (refer to the device's
own manual for information about its I/O ports and
user controls and how to operate the device):
1. Turn off both the Recorder and the external
recording device.
2. Get an audio cable with a 3.5-mm mini audio plug
on the Recorder end and an appropriate plug or
adapter on the external-device end. (You can use
the included audio cable if the source device also
has a 3.5-mm jack.) Run this audio cable from the
external device's "auxiliary in" or "microphone in"
port to the earphone jack on the left side of the
Recorder, as shown in Figure 7-3 on the next page.
3. Set the Recorder's volume to 5. Set the volume on
the external recording device to its medium
setting.
47