Table of Contents
Advertisement
4.1 Basic Recording
To record voice messages with the Digital Voice
Recorder, take these steps, referring to Figure 2-1 in
Section 2.3 to see where the Recorder's components are:
Before attempting to record anything important, make
several sample recordings to familiarize yourself with how
the Recorder works.
1. Set the HOLD switch on the Recorder's left side to
the OFF position (down), then press the
REC/STOP button on the front of the Recorder
to turn the Recorder ON.
2. Referring to the Recorder's LCD, press the FILE
button on the Recorder's right side as many times
as necessary to select which of the Recorder's four
files ("A," "B," "C," or "D") you want to record the
message in. (If, while you are recording, the
Recorder indicates that the selected file is full,
you'll need to use a different file or erase some of
the messages in the current file. For instructions
on erasing messages, see Chapter 6.)
CAUTION!
CHAPTER 4: Recording
21
Advertisement
Table of Contents
