Table of Contents
Advertisement
CHAPTER 4: Recording
4.3 Other Recording Functions
4.3.1 P
AUSING
While the Digital Voice Recorder is recording, you can
pause the recording by pressing the MODE/PAUSE
button on the front of the Recorder. The word "PAUSE"
will begin to flash in the Recorder's LCD to indicate that
the recording is paused. (The red LED on the
REC/STOP button will also begin flashing.) To resume
recording, press MODE/PAUSE again or press the
REC/STOP button. (If you press MODE/PAUSE when
the Recorder is not recording, you will change the
recording mode, as described in Section 4.2.)
25
Advertisement
Table of Contents
