Table of Contents
Advertisement
6.2 Erasing an Entire File
To erase an entire message file in the Digital Voice
Recorder's memory, take these steps, watching the LCD
carefully and making sure to start with the Recorder
turned off:
1. Move the HOLD switch to OFF (down), then press
the REC/STOP button to turn the Recorder on.
2. Press the FILE button as many times as necessary
to select the message file ("A," "B," "C," or "D")
that you want to delete.
3. Press and hold both the ERASE button and the
FILE button for more than one second. The letter
designation of the message file ("A," "B," "C," or
"D") and the words "AL ERASE" ("all erase") will
begin blinking on the LCD for three seconds. If
you press ERASE again during this three-second
interval to confirm your choice, that message file
and all messages in it will be deleted. (Subsequent
messages recorded in that file will be numbered
starting with "1" again; this will be displayed as
"01".) If you press any other button while
"AL ERASE" is blinking, or if you don't press
anything before the three-second interval expires,
the erasure will be aborted and that file and all of
CHAPTER 6: Erasing
39
Advertisement
Table of Contents
