Table of Contents
Advertisement
DIGITAL VOICE RECORDER
4.3.2 A
R
(U
ARS)
UTOMATIC
ECORDING
SING THE
In its factory-default setting, the Digital Voice Recorder
records continuously until it is paused or stopped. If
you'd rather, you can set the Recorder to record only
when it detects a voice or other prominent sound, in
order to preserve your batteries and maximize your
recording time. To do this, turn on the Recorder's
Automatic Recording System (ARS) by moving the
switch labeled "ARS" on the left side of the Recorder
from the bottom "Off" position to either the middle
"Lo" position (if you are in an area with a lot of
background noise) or the top "Hi" position (if you are
in a quiet area). Move the ARS switch back to the "Off"
position to turn ARS off.
When you record with ARS on, recording will proceed
while there is prominent sound to record. "V-" will
appear on the LCD to the left of the "R" recording
symbol. But whenever the Recorder stops detecting
sound, it stops recording, and replaces the display of the
elapsed recording time on the LCD with the letters
"ARS."
26
Advertisement
Table of Contents
