Table of Contents
Advertisement
CHAPTER 4: Recording
4. When you've finished recording, press REC/STOP
again.
If no other buttons are pressed for one minute after you
stop recording, the Recorder will shut itself OFF
automatically.
If your batteries ever become fully discharged while
you are recording, the "BATT" symbol on the LCD will
begin blinking to warn you, and then the Recorder will
automatically shut itself OFF. You can resume recording
as soon as you replace the batteries. Do not remove the
Recorder's batteries while recording is in progress—you
could erase previously recorded messages and degrade
the Recorder's performance. Make sure the Recorder is
set to STOP (not recording or playing back anything)
when you remove or replace batteries.
23
Advertisement
Table of Contents
