Playback; Basic Playback - Black Box TE110A User Manual

Digital voice recorder
Hide thumbs Also See for TE110A:
Table of Contents

Advertisement

This chapter assumes that you'll be using the Digital
Voice Recorder's built-in speaker. If you want to play
back through an external device, see Chapter 7 for the
additional instructions for attaching these devices and
playing back through them.
As you use this chapter, refer to Figure 2-1 in
Section 2.3 to see where the Recorder's controls,
connectors, and indicators are.

5.1 Basic Playback

To play back messages you've previously recorded with
the Digital Voice Recorder, take these steps:
1. Move the HOLD switch to OFF (down), then press
the PLAY/STOP pushdial on the Recorder's right
side to turn on the Recorder.
2. Press the PLAY/STOP pushdial again and the
Recorder will begin to continuously play back
messages, displaying the message numbers as it
does so. (If you don't select a particular message
for playback as described in Section 5.2.2,
playback will begin with the oldest recorded

5. Playback

CHAPTER 5: Playback
29

Advertisement

Table of Contents
loading

Table of Contents