Wirepath WPS-DVR Quick Start Manual page 6

WPS-DVR Quick Start Guide
Set the Video Stream in the Network tab. Video Stream is the quality of the video viewed remotely through Internet
Explorer or on a Smartphone. This does not affect the quality of video being recorded to the DVR. Options include:
Record – This matches the quality of the video in the settings made in the Pre Camera tab. Typically, this is higher
quality, but based on the bandwidth capability of the network, the refresh rate of the image may be slow.
QCIF – This setting will enable Dual Streaming for IE and Smartphones, and will improve the refresh rate of the video.
It is recommended that this is set to QCIF Super Fine – Best QCIF Resolution.
3.1.1. Recommended Settings for typical networks
Connection
Record
Setting
Compression
Record
Quality
Video Stream
C. To save the settings, Upload to the DVR.
D. Select Yes when asked to continue.
E. Close the Device Properties Menu and close the Device List.
6
Fiber /Cable
Type
D1
Normal
9
Record
For the best quality
video recording to the
DVR and streaming to
remote devices on a
Notes
high speed network
This setting provides
the LEAST amount of
record time.
DVR BASIC SETUP IS NOW COMPLETE
DSL / 3G Smartphone
D1
Normal
5
QCIF Superfine
For the most efficient
use of hard drive
For high quality video
space and steaming
recording to the DVR
to devices on a slow
and smooth motion
steaming to medium
This setting provides
speed networks
the MOST amount of
record time.
CIF
Normal
1
QCIF Fair
network