Advertisement
MECHANICAL INSTALLATION
1. Apply the adhesive cutout on the ceiling
using the template provided.
3. Ensure wiring is securely fitted to the
loudspeaker spring terminals, with correct
polarity, positive - red, negative - black .
5. Progressively tighten the screws until a firm
grip is achieved. Do not overtighten, use
lowest torque setting if using a cordless
screwdriver.
04_ MERCURY iC MANUAL
2. Using a keyhole saw, cut out the hole in the
ceiling by following the dotted line outlined
on the cutout template.
4 Slide the loudspeaker assembly through the
hole, and turn the screws to extend the
mounting wings. To avoid damage, do not hold
the loudspealer by the tweeter assembly.
6. Position the grille centrally, and push gently
until the edge of the grille is flush with the
surrounding bezel.
Advertisement
