Surface mount satellite loudspeaker for commercial applications compact wall mount subwoofer for commercial applications packaged satellite-subwoofer loudspeaker system for commercial applications (15 pages)
24hrs use. Once they have been further run-in over a longer period, there will be clear enhancement of stero imaging, mid-band qulaity and bass performance characteristics. BI-AMPING We are confident that you will continue to enjoy your new Tannoy loudspeakers for many years to SCREENING come. TECHNICAL SPECIFICATIONS...
QUICK SET UP PLEASE REFER TO THE SPECIFICATION AND INSTALLATION DIAGRAM SHEET SUPPLIED WITH THIS MANUAL 1. Remove the loudspeakers from all packaging. Fold the carton flaps right back and invert the carton and contents. Lift the carton clear of the contents. Remove all the inner packaging from the product.(See figure 1) It is strongly recommended that you store all the packaging to allow protected transportation in future.
Use a high quality bi-wire cable to connect the speakers to the amplifier. It is recommended that the same cable length and type be used for both bass and treble. It is essential that the coupling links between the loudspeaker terminals be removed. Avoid potential damage to your amplifier - ensure that all connections are secure and the polarity is correct in all wiring.
SUBWOOFER As the subwoofer only produces low frequency, therefore monaural information, it is difficult to detect its location by ear. It could as a result be situated anywhere in the room, but optimum performance will be gained by locating the subwoofer between the main stereo pair of speakers. Bass output will increase when placed next to a wall or in a corner so use the subwoofer volume control to balance the output with the rest of the system.
SET-UP DIAGRAMS FIG. 1 FIG. 2 LINKS IN PLACE SET-UP DIAGRAMS FIG. 3 0.5 METRES OR MORE FIG. 4 TO RIGHT SPEAKER POWER AMPLIFIER 1.5 TO 4.5 METRES 1 METRE OR MORE POWER AMPLIFIER LINKS REMOVED TO RIGHT SPEAKER...
Page 7
SET-UP DIAGRAMS FIG. 5 FIG. 6 LINKS REMOVED NOTES HEIGHT FROM FLOOR 1.5-2.0 METRES HIGH FREQUENCY POWER AMPLIFIER LOW FREQUENCY POWER AMPLIFIER...
Need help?
Do you have a question about the Mercury F Custom and is the answer not in the manual?
Questions and answers