Connecting The Usb Device; Network Connection; Connecting Via An Ethernet Hub; Connecting The Power Cord - Pioneer BDP-3110 Operating Instructions Manual

Connecting the USB device

02
Notes:
• Be sure to turn the player's power off
before connecting or disconnecting USB
devices.
• Use empty USB devices (on which nothing
is stored).
• When using an external hard disk as the
external storage device, be sure to turn on
the hard disk's power before turning on the
player's power.
• If the USB device is write-protected, be
sure to disable the write-protection.
• When connecting the USB cable, hold onto
the plug, set the plug in the proper direction
for the port and insert it horizontally.
• Placing excessive loads on the plug may
result in poor contact, making it impossible
to write data on the USB device.
• When a USB device is connected and the
player's power is turned on, do not unplug
the power cord.
Player's front panel
USB flash drive
Notes:
• Devices may not work if connected to the
USB port via a memory card reader or USB
hub.
• Use a USB cable with a length of 2 meters
or less.

Network connection

BD-LIVE functions such as downloading
movie trailers or additional audio and subtitle
languages and playing on-line games can be
enjoyed over the Internet.
Be sure to use a 10BASE-T/100BASE-TX
compatible Ethernet hub or router.
16
Hard disk, etc.
USB cable
(commercially
available)

Connecting via an Ethernet hub

The player can be connected to an Ethernet
hub using a LAN cable.
Player's rear panel
Internet Modem
Notes:
• If there is an available DHCP server in
your local area network, the IP address is
obtained automatically. Otherwise, set IP
address manually.
• For some Internet service providers, you
may have to set the individual network
configuration manually.
• Pioneer is not responsible for any
malfunction of the player due to
communication error/malfunctions
associated with your network connection
and/or your connected equipment. Please
contact your Internet service provider or
network device manufacturer.

Connecting the power cord

Connect the power cord after all the
connections between devices have been
completed.
Player's rear panel
To wall outlet
LAN cable
(commercially
available)
LAN
WAN 1 2 3
Ethernet hub
(router with hub
functionality)
Power cord